Forest Fire

The Copernicus Sentinel-3A satellite captured this image of smoke from wildfires in the US state of California on 9 October 2017. Image: contains modified Copernicus Sentinel data (2017), processed by ESA, CC BY-SA 3.0 IGO.

Definition

Wildfire, also called forest, bush or vegetation fire, can be described as any uncontrolled and non-prescribed combustion or burning of plants in a natural setting such as a forest, grassland, brush land or tundra, which consumes the natural fuels and spreads based on environmental conditions (e.g., wind, topography). Wildfire can be incited by human actions, such as land clearing, extreme drought or in rare cases by lightning (IRDR).

There are three conditions that need to be present in order for a wildfire to burn: fuel, oxygen, and a heat source. Fuel is any flammable material surrounding a fire, including trees, grasses, brush, even homes. The greater an area's fuel load, the more intense the fire. Air supplies the oxygen a fire needs to burn. Heat sources help spark the wildfire and bring fuel to temperatures hot enough to ignite. Lightning, burning campfires or cigarettes, hot winds, and even the sun can all provide sufficient heat to spark a wildfire (National Geographic).

Facts and figures

The Global Wildland Fire Network Bulletin published by the Global Fire Monitoring Center (GFMC) presents the most recent data regarding consequences of wildfire: in 2017, 36 fires in protected areas were recorded in 19 countries burning more than 196000 hectares worldwide.

Wildfire plays a mixed role for ecology and economy since some ecosystems depend on natural fires to maintaining their dynamics, biodiversity and productivity. However, every year, wildfires burn millions of hectares of forest woodlands and other vegetation, causing the loss of many human and animal lives and an immense economic damage, both in terms of resources destroyed and the costs of suppression. There are also impacts on society and the environment, such as damage to human health from smoke, loss of biological diversity, release of  greenhouse gases, damage to recreational values and infrastructure (FAO).

Most fires are caused by people. The list of human motivations include land clearing and other agricultural activities, maintenance of grasslands for livestock management, extraction of non-wood forest products, industrial development, resettlement, hunting, negligence and arson. Only in very remote areas of Canada and the Russian Federation lightning is a major cause of fires (FAO).

There are three basic types of wildfires:

  • Crown fires burn trees up their entire length to the top. These are the most intense and dangerous wildland fires.
  • Surface fires burn only surface litter and duff. These are the easiest fires to put out and cause the least damage to the forest.
  • Ground fires (sometimes called underground or subsurface fires) occur in deep accumulations of humus, peat and similar dead vegetation that become dry enough to burn. These fires move very slowly, but can become difficult to fully put out, or suppress (Government of Canada).

Further information

FAO International Handbook on Forest Fire Protection
UNDRR Wildfire Hazard and Risk Assessment
WWF Report - Forests Ablaze. Causes and effects of global forest fires
The European Forest Fire Information System (EFFIS)
The Global Wildfire Information System (GWIS)

Related content

SAM Satellite

SPOT 4

The satellites SPOT 4 (Satellite Probatoire de l'Observation de la Terre) was a second generation of SPOT earth observation satellite operated by Spot Image.

SPOT 4 used the improved bus design, which differed from the earlier SPOT series by having an increased lifetime of five years instead of three, a new extended platform design and service module, which can accommodate twice the payload. The propulsion module consists of a frame made of aluminum bars and two capillary tanks holding 158 kg of hydrazine.

... read more

Launch date:
24/03/1998
SPOT 3

The satellites SPOT 1, 2 and 3 (Satellite Probatoire de l'Observation de la Terre) were the first generation of SPOT earth observation satellites operated by Spot Image.

The first generation SPOT satellites were built on the SPOT Mk.1 bus with a lifetime of three years.

The SPOT satellites were identical, with each carrying two identical HRV (High Resolution Visible) imaging instruments that were able to operate... read more

Launch date:
26/09/1993
SPOT 2

The satellites SPOT 1, 2 and 3 (Satellite Probatoire de l'Observation de la Terre) were the first generation of SPOT earth observation satellites operated by Spot Image.

The first generation SPOT satellites were built on the SPOT Mk.1 bus with a lifetime of three years.

The SPOT satellites were identical, with each carrying two identical HRV (High Resolution Visible) imaging instruments that were able to operate... read more

Launch date:
22/01/1990
SPOT 1

The satellites SPOT 1, 2 and 3 (Satellite Probatoire de l'Observation de la Terre) were the first generation of SPOT earth observation satellites operated by Spot Image.

The first generation SPOT satellites were built on the SPOT Mk.1 bus with a lifetime of three years.

The SPOT satellites were identical, with each carrying two identical HRV (High Resolution Visible) imaging instruments that were able to operate... read more

Launch date:
22/02/1986
Landsat 5

Landsat 5 was launched from Vandenberg Air Force Base in California on March 1, 1984, and like Landsat 4, carried the Multispectral Scanner (MSS) and the Thematic Mapper (TM) instruments. Landsat 5 delivered Earth imaging data nearly 29 years - and set a Guinness World Record For 'Longest Operating Earth Observation Satellite', before being decommissioned on June 5, 2013.
The Landsat 5 satellite orbited the the Earth in a sun-synchronous, near-... read more

Launch date:
01/03/1984
Landsat 4

Landsat 4 was launched on July 16, 1982. The Landsat 4 spacecraft was significantly different than that of the previous Landsats, and Landsat 4 did not carry the RBV instrument.
In addition to the Multispectral Scanner System (MSS) instrument, Landsat 4 (and Landsat 5) carried a sensor with improved spectral and spatial resolution, i.e., the new satellites could see a wider (and more scientifically-tailored) portion of the electromagnetic spectrum and could see the ground in greater detail. This new instrument was known as the Thematic Mapper (TM).
Landsat 4 was kept in... read more

Launch date:
16/07/1982
Landsat 3

Landsat 3 was launched on March 5, 1978, three years after Landsat 2.
The Landsat program’s technical and scientific success together with political and economic pressures lead to the decision to commercialize an operational Landsat. To this end, responsibility was slated to shift from NASA (a research and development agency) to the National Oceanic and Atmospheric Administration (NOAA), the agency charged with operating the weather satellites. This was done via Presidential Directive/NSC-54 signed on Nov. 16, 1979 which assigned NOAA “management responsibility for civil operational land remote sensing activites.” (However, operational management was not transfered from NASA to NOAA until 1983).
Landsat 3 carried the same sensors as its predecessor: the Return Beam Vidicon (... read more

Launch date:
05/03/1978
Landsat 2

Landsat 2 was launched into space onboard a Delta 2910 rocket from Vandenberg Air Force Base, California on January 22, 1975, two and a half years after Landsat 1. Originally named ERTS-B (Earth Resource Technology Satellite B), the spacecraft was renamed Landsat 2 prior to launch. The second Landsat was still considered an experimental project and was operated by NASA.
Landsat 2 carried the same sensors as its predecessor: the Return Beam Vidicon (RBV) and the Multispectral Scanner System (MSS).
On February 25, 1982 after seven years of service, Landsat 2 was removed from operations due to yaw control problems; it was offically decommissioned on July 27, 1983.

Instruments:
Return Beam Vidicon (RBV)
Multispectral Scanner (MSS)
 

Launch date:
22/01/1975
Landsat 1

Landsat 1 was launched on July 23, 1972; at that time the satellite was known as the Earth Resources Technology Satellite (ERTS). It was the first Earth-observing satellite to be launched with the express intent to study and monitor our planet’s landmasses. To perform the monitoring, Landsat 1 carried two instruments: a camera system built by the Radio Corporation of America (RCA) called the Return Beam Vidicon (RBV), and the Multispectral Scanner (MSS) built by the Hughes Aircraft Company. The RBV was supposed to be the prime instrument, but the MSS data were found to be superior. In addition, the RBV instrument was the source of an electrical transient that caused the satellite to briefly lose altitude control, according to the Landsat 1 Program Manager, Stan Weiland.
To help understand the... read more

Launch date:
23/07/1972

Recommended Practices

Recommended Practice: Land Cover Change Detection through Supervised Classification
This Recommended Practice aims to (1) conduct a supervised land cover classification in QGIS using the SCP plugin and (2) to conduct change detection analysis. These skills are applicable to a vast range of disasters throughout the entire disaster management cycle. In this example, the remote sensing technique is applied to monitor deforestation in a part of the Amazon rainforest south of Santarém, Pará, in Brazil. However, it can be applied to any other study area. The required inputs are two or more satellite images of the same area at a different point in time. This will result in an...

Pages

Hazard group

Terms in the same hazard group

Zircon - This is a contributing Drupal Theme
Design by WeebPal.